Programming DeFi: Uniswap - Part 2
This is part two of my series on programming DeFi smart contracts. In the previous part, we learned about Uniswap and its core mechanics and started building an exchange contract. The contract can accept liquidity from users, calculate output amounts, and perform swaps.
Today, we’re going to finish Uniswap V1 implementation. While it won’t be a full copy of Uniswap V1, it’ll have all core features.
This part is packed with new code, so let’s get straight to it.
To see changes since the previous part, click here.
To see full code of the project so far, click here.
Adding more liquidity
In the previous part, we discussed that our implementation of addLiquidity is not complete. There was a reason for that and today we’re going to finish the function.
So far, the function looks like that:
Can you identify the problem?
The function allows to add arbitrary amounts of liquidity at any moment.
As you remember, exchange rate is calculated as a ratio of reserves:
Where PXP_XPX and PYP_YPY are prices of ether and token; xxx and yyy are reserves of ether and token.
We also learned that swapping tokens changes reserves in a non-linear way, which affects prices, and that arbitrageurs make profit by balancing prices so they match those of big central exchanges.
The problem with our implementation is that it allows to significantly change prices at any point of time. Or, in other words, it doesn’t enforce current reserves ratio on new liquidity. This is a problem because this allows price manipulations, and we want prices on decentralized exchanges to be as close to those on centralized exchanges. We want our exchange contracts to act as price oracles.
So, we must ensure that additional liquidity is added in the same proportion that has already established in the pool. At the same time, we want to allow liquidity in an arbitrary proportion when reserves are empty, i.e. when a pool hasn’t yet been initialized. And this is an important moment because this is when the price is set initially.
Now, addLiquidity will have two branches:
- If this is a new exchange (no liquidity), allow an arbitrary liquidity proportion when pool is empty.
- Else, enforce established reserves proportion when there’s some liquidity.
The first branch remains unchanged:
The second branch is where the new code goes to:
The only difference is that we’re not depositing all tokens provided by user but only an amount calculated based on current reserves ratio. To get the amount, we multiply the ratio (tokenReserve / ethReserve) by the amount of deposited ethers. Then, an error is thrown if user deposited less than this amount.
This will preserve a price when liquidity is added to a pool.
We haven’t discussed this concept but it’s a crucial part of the Uniswap design.
We need to have a way to reward liquidity providers for their tokens. If they’re not incentivized, they won’t provide liquidity because no one would put their tokens in a third-party contract for nothing. Moreover, that reward shouldn’t be paid by us because we’d have to get investments or issue an inflationary token to fund it.
The only good solution is to collect a small fee on each token swap and distribute accumulated fees among liquidity providers. This also seems pretty much fair: users (traders) pay for services (liquidity) provided by other people.
For rewards to be fair, we need to reward liquidity providers proportionally to their contribution, i.e. the amount of liquidity they provide. If someone has provided 50% of pool liquidity, they should get 50% of accumulated feels. This makes sense, right?
Now, the task seems pretty complicated. However, there’s an elegant solution: LP-tokens.
LP-tokens are basically ERC20 tokens issued to liquidity providers in exchange for their liquidity. In fact, LP-tokens are shares:
- You get LP-tokens in exchange for your liquidity.
- The amount of tokens you get is proportional to the share of your liquidity in pool’s reserves.
- Fees are distributed proportionally to the amount of tokens you hold.
- LP-tokens can be exchanged back for liquidity + accumulated fees.
Ok, how will we calculate the amount of issued LP-tokens depending on the amount of provided liquidity? This is not so obvious because there a some requirements we need to meet:
- Every issued share must be always correct. When someone deposits or removes liquidity after me my share must remain correct.
- Write operations (e.g. storing new data or updating existing data in a contract) on Ethereum are very expensive. So we’d want to reduce maintenance costs of LP-tokens (i.e. we don’t want to run a scheduled job that regularly recalculates and updates shares).
Imagine if we issue a lot of tokens (say, 1 billion) and distribute them among all liquidity providers. If we always distribute all the tokens (first liquidity provider gets 1 billion, second one gets a share of it, etc.) we are forced to recalculate issued shares, which is expensive. If we distribute only a portion of the tokens initially, then we’re risking hitting the supply limit, which will eventually force use into redistributing existing shares.
The only good solution seems to not have supply limit at all and mint new tokens when new liquidity is added. This allows infinite growth and, if we use a proper formula, all issued shares will remain correct (will scale proportionally) when liquidity is added or removed. Luckily, inflation doesn’t reduce value of LP-tokens because they’re always backed by some amount of liquidity that doesn’t depend on the number of issued tokens.
Now, the final piece in this puzzle: how to calculated the amount of minted LP-tokens when liquidity is deposited?
The exchange contract stores reserves of ether and token, so we’d want to calculate based on reserves of both… or only one of them? Or both? I don’t know 😁 Uniswap V1 calculates the amount proportionally to the ether reserve, but Uniswap V2 allows only swaps between tokens (not between ether and token), so it’s not clear how to choose between them. Let’s stick to what Uniswap V1 does and later we’ll see how to solve this problem when there are two ERC20 tokens.
This equation shows how the amount of new LP-tokens is calculated depending on the amount of ethers deposited:
Every liquidity depositing issues LP-tokens proportionally to the share of deposited ethers in ether reserve. This is tricky, try putting different numbers in this equation and see how total amount changes. For example, what amountMinted and totalAmount would be when someone deposits etherReserve amount of ethers? Are issued shares still valid after that?
Let’s get to the code.
Before modifying addLiquidity, we need to make our Exchange contract an ERC20 contract and change its constructor:
Our LP-tokens will have a constant name and a symbol, this is how Uniswap does it. Feel free to improve this by taking the underlaying token’s name and symbol.
Now, let’s update addLiquidity: when adding initial liquidity, the amount of LP-tokens issued equals to the amount of ethers deposited.
Additional liquidity mints LP-tokens proportionally to the amount of ethers deposited:
Just a few lines and we now have LP-tokens!
We’re now ready to collect fees on swaps. Before that, we need to answer a couple of questions:
- Do we want to take fees in ether or tokens? Do we want to pay rewards to liquidity providers in ether or tokens?
- How to collect a small fixed fee from each swap?
- How to distribute accumulated fees to liquidity providers proportionnaly to their contribution?
Again, this might be seemed as a difficult task but we already have everything to solve it.
Let’s think about the last two questions. We might introduce an extra payment that’s sent along with a swap transaction. Such payments then get accumulated in a fund from which any liquidity provider can withdraw an amount proportional to their share. This sounds like a reasonable idea and, surprisingly, it’s almost done:
- Traders already send ethers/tokens to the exchange contract. Instead of asking for a fee we can simply subtract it from ethers/tokens that are sent to the contract.
- We already have the fund — it’s the exchange reserves! The reserves can be used to accumulated fees. This also means that reserves will grow over time, so the constant product formula is not that constant! However, this doesn’t invalidate it: the fee is small compared to reserves and there’s no way to manipulate it to try to significantly change reserves.
- And now we have an answer to the first question: fees are paid in the currency of the traded in asset. Liquidity providers get a balanced amount of ethers and tokens plus a share of accumulated fees proportional to the share of their LP-tokens.
That’s it! Let’s get to the code.
Uniswap takes 0.03% in fees from each swap. We’ll take 1% just so that it’s easier to see the difference in tests. Adding fees to the contract is as easy as adding a couple of multipliers to getAmount function:
Since Solidity doesn’t support floating point division, we have to use a trick: both numerator and denominator are multiplied by a power of 10, and fee is subtracted from the multiplier in the numerator. Normally, we would calculate it like that:
In Solidity, we have to do it like that:
But it’s still the same thing.
Finally, last function on our list: removeLiquidity.
To remove liquidity we can again use LP-tokens: we don’t need to remember amounts deposited by each liquidity provider and can calculate the amount of removed liquidity based on an LP-tokens share.
When liquidity is removed, it’s returned in both ethers and tokens and their amounts are, of course, balanced. This is the moment that causes impermanent loss: the ratio of reserves changes over time following changes in their prices in USD. When liquidity is removed the balance can be different from what it was when liquidity was deposited. This means that you would get different amounts of ethers and tokens and their total price might be lower than if you have just held them in a wallet.
To calculate the amounts we multiply reserves by the share of LP-tokens:
Notice that LP-tokens are burnt each time liquidity is removed. LP-tokens are only backed by deposited liquidity.
LP reward and impermanent loss demonstration
Let’s write a test that reproduces the full cycle of adding liquidity, swapping tokens, accumulating fees, and removing liquidity:
- First, liquidity provider deposits 100 ethers and 200 tokens. This makes 1 token being equal to 0.5 ethers and 1 ether being equal to 2 tokens.
2. A user swaps 10 ethers and expects to get at least 18 tokens. In fact, they got 18.0164 tokens. It includes slippage (traded amounts are relatively big) and the 1% fee.
3. Liquidity provider then removes their liquidity:
4. Liquidity provider got 109.9 ethers (transaction fees included) and 181.9836 tokens. As you can see, these numbers are different from those that were deposited: we got the 10 ethers traded in by the user but had to give 18.0164 tokens in exchange. However, that amount includes the 1% fee the user has paid to us. Since the liquidity provider has provided all the liquidity, they got all the fees.
That was a big post! Hopefully LP-tokens are not a mystery for you anymore and Uniswap is easy as pie (not cake 😉).
However, we’re not done yet: Exchange contract is now finished, but we also need to implement Factory contract, which serves as a registry of exchanges and a bridge that connects multiple exchanges and makes token-to-token swaps possible. We’ll implement it in the next part!
Check out my blog to learn more about blockchains, smart contracts, and DeFi.
- Best Free Crypto Trading Bots — Top 16 Bitcoin Trading Bot 
- Best 6 Crypto Trading Signals Telegram Channels
- BlockFi Review 2021 — Earn 8.6% Interest Rates on Your Crypto
- Crypto Tax Software — Top 5 Best Bitcoin Tax Calculators 
Join Coinmonks Telegram Channel and learn about crypto trading and investing
- MXC Exchange Review | Pionex vs Binance | Pionex Arbitrage Bot
- My Experience with Crypto Copy Trading | Coinbase Review
- Cryptocurrency Savings Accounts | Staking Crypto | StealthEX Review
- BigONE Exchange Review | CEX.IO Review | Swapzone Review
- Best Bitcoin Margin Trading| Bityard Margin Trading | Prokey Review
- Crypto Margin Trading Exchanges | Earn Bitcoin | Mudrex Invest
- WazirX vs CoinDCX vs Bitbns | BlockFi vs CoinLoan vs Nexo
- BlockFi Credit Card | How to buy Bitcoin on Binance
- Crypto Copy Trading Platforms | Top 5 BlockFi Alternatives
- CoinLoan Review | Crypto.com Review | Huobi Margin Trading
- Top paid cryptocurrency and blockchain courses | Binance Review
- How to use BitMEX in the USA? | BitMEX Review | Binance vs Bittrex
- Best Free Crypto Signals | YoBit Review | Bitbns Review
- OKEx Review | Kucoin Trading Bot| Futures Trading Bots
- Coinbase Staking | Hotbit Review | KuCoin Review
- Best Crypto Trading Signals Telegram | MoonXBT Review
- Coinswitch Kuber Review | Grid Trading Bots | Coinbase Fees